By Bill Johnson

It truly is extremely important for you to preserve your brand-new wood sided shed with stain or paint as soon as possible once you've crafted it, or once you had it installed using a shed company. Three of the most frequently used kinds of wood siding for sheds are pine, cedar, and Texture 111.

Many people are of the belief that cedar siding, whether it is tongue & groove boards or clapboards, doesn't need to be protected. This is certainly far from true! While cedar might be more rot-resilient than pine or Texture 111, and would probably endure somewhat longer if allowed to remain unprotected, it is still wood and will degrade eventually. Cedar is typically used when insects for instance carpenter ants or termites exist or likely, because it does have a natural repellent inside the wood which the bugs will stay clear of.

One other two styles of siding: pine and Texture 111, will rot quickly if allowed to remain unstained or unpainted. These kinds of siding are generally kiln dried in the lumber mill but, if allowed to remain unprotected, the wood will quickly turn a dull grey color simply because the dry wood soaks in moisture into the pours. Sooner or later, the moisture will continue to work its way deep inside the boards, turn them a black color, and shall rot them via the inside out. The areas of one's shed most subject to this condition are the areas that are very close to the earth, since rain falling from the sky or running off the roof will splash up in the ground and really soak the wood. This is actually usually far more of a problem around the sides on the shed which don't acquire much sunshine mainly because it normally takes considerably longer for it to dry.

So, exactly what is the best way to protect your shed? You will find basically two trains of thought in this area. A veteran "house painter" will likely inform you to get a premium quality primer, and apply at least 1 coat, and possible two, especially on the knots. Then apply a coat of a premium quality exterior paint. In general, with paint, you get what you pay for. It's always definitely worth a few extra dollars per gallon of paint to get a better quality product. There is one major downside of paint, however. At some point it's going to start to peel and flake off and will definitely demand considerable sanding and scraping to ready it for another coat of primer and/or paint.

The alternative option might be advice you may well get from an experienced "wood worker", which would probably be a good quality stain. The key distinction between paint and stain would be the fact paint simply coats the outer layer of the wood that is a good way to safeguard it. However, stain actually takes up into the pores of the wood, also providing good protection. The chief advantage to making use of a stain is the fact that there's almost no preparation required, such as priming, and as the stain ages, it is going to not peel or flake like paint. It may start to take on a dull or chalky appearance but when that takes place, you simply need to just wash the shed and apply another coat of sanding or scraping required. And, since 1 gallon of stain will take care of about the same as two gallons of primer & paint you would undoubtedly likely to have to get, there should be a substantial cost savings also.

About the Author:

blog comments powered by Disqus